Description
Pneumatic Globe Sleeve Control Valve
Introduction
The pneumatic diaphragm sleeve control valve is a pressure balance type regulating valve. Equipped with a multi-spring actuator, the overall structure of compact, heavy light, good stability. The fluid channel was 3 streamlined, the pressure drop loss is small, allowing large pressure, noise, circulation capacity. Widely used in precise control of gas, liquid, and other media process parameters such as pressure, flow, temperature, a liquid level maintained at a given value. Particularly suitable for large flow, large pressure, leakage requirements are not high occasions.
This series of products are standard and adjustable cutting type, bellows sealing type, jacket insulation, and other varieties. Products nominal pressure level households ~ 10, 16, 40, 64, body diameter range from DN20 ~ 500, the application of fluid temperature from -196 ℃ ~ + 560 ℃, within the scope of a variety of grades. Leakage standards are ClassIV, Class V, and Class VI. Flow characteristics are linear or equal percentages. Variety of varieties, specifications to choose from.
Model Selection
JC |
Actuator |
H |
Structure |
Nominal
pressure |
Body
material |
Nominal
size |
JC
series control valve |
J:
pneumatic diaphragm actuator H: pneumatic piston actuator R: electric 3810L actuator D: electric PSL actuator |
Hdirect travel |
P: standard single seat PF: soft sealing single seat PL: single seat cage type PG: radiator single seat type PV: bellow seal single seat PD: low temperature single seat |
PN16=16 CL150LB=150 LB JIS10K=10K |
C=WCB LC=LCB P=CF8 PL=CF3 R=CF8M RL=CF3M D=special material |
DN25= DN25 NPS1 〞 =NPS1〞 |
Such as: JC type pneumatic diaphragm single seat control valve, PN16, body: WCB, nominal size: DN50, type:
JCJHP-16C DN50 |
Actuator type
Type
Method |
Pneumatic diaphragm actuator | Electric actuator |
JCH23~JCH56 | 3810L series | |
Multi-spring type | Intelligent integrated type | |
Usage | Regulating type, ON-OFF type | Regulating |
Air supply pressure or Power supply voltage | Air supply pressure (Spring range) 140(20~100)Kpa G
240 (40~200) Kpa G 280 (80~240) Kpa G |
Power: AC 200V±10% 50Hz Or Power: AC 380V±10% 50Hz○1 |
Connector | Air pipe connector: RC1/4 | Nomal type: cable inlet 2-PF(G1/2〞)
Explosive proof: Protection jacket PF(G3/4〞) |
Direct action | Pressure increase, stem descend, valve close. | Input signal increase, stem descend, valve close. |
Reaction | Pressure increase, stem ascend, valve open. | Input signal increase, stem ascend, valve open. |
Input signal | 40~20mA.DC(with positioner) | Input/output4~20mA.DC |
Lag | ≤1%FS(with positioner) | ≤0.8%FS |
Linear type | 2%FS(with positioner) | ≤+1%FS |
Environmental temperature |
-10℃~+70℃ |
Standard type: -10℃~+60℃ With space heater○1 : -35℃~+60℃
Explosive proof: -10℃~+40℃ |
Surface coating | Green, acrylic acid polyurethane coating | Blue, acrylic acid polyurethane coating |
Accessories | E/P, P/P valve positioner, filter regulator, valve
converter, solenoid valve, limited switch |
Space hearter (normal type) |